Talk:Main Page

Not much to tell about myself at all.
I enjoy of finally being a part of this community.
I really hope I'm useful at all

My site - Arten Von krediten

Benchtop Temperature Humidity Environmental Testing Chamber quotation

Benchtop Temperature Humidity Environmental Testing Chamber quotation Our Product 1. High and low temperature(humidity) test chamber 2. Aging test chamber 3. Rapid temperature change test chamber 4. Three comprehensive (vibration, temperature, humidity) test chambers 5. Temperature shock test chamber 6. High and low temperature of vacuum test chamber 7. Rain test chamber 8. Sand and dust test chamber 9. Salt spray test chamber 10. Support large walk-in non-standard custom test box Product Application Aerospace New energy Power Battery Electronic industry Railway industry Automobile industry Pharmaceutical industry Production Equipment The company has a completely automatic sheet metal cutting production line and assembly production line, and all kinds of production equipment are fully configured. Production Market Currently the Chinese market accounts for 60% of the total market sales. The main customers are classified into the new energy field, the lithium batteries field, the railway industry and automobile industry, etc. The customers in East Asia, Southeast Asia and the Americas are the second proportion in the market sales, which accounts for about 30%. Typical customers include: Georgia State Key Laboratory, Panasonic Batteries, TCL, LG, CRRC, BOSCH, SONY, muRata.Benchtop Temperature Humidity Environmental Testing Chamber quotation website:http://www.climate-testing.com/

Customized In Mold Label for Households

Customized In Mold Label for Households Gaobao printing is a professional manufacturer of heat transfer printing and in mould labels. We produce heat transfer machine & heat transfer film & in mould labels. Our products are specialized for plastic products printing, which can increase product鈥檚 grade greatly. We have engaged in printing field for many years, we are always famous for top quality combine with competitive price and best service. Our company is SGS approved, heat transfer film and in mould labels pass American ASTM F 963-08 & European EN71 & ROHS standard, and heat transfer machine is CE approved. Really hope to develop good business relationship as well as friendship with you!Customized In Mold Label for Households website:http://www.gaobao-printing.com/

Microporous Shoe Cover wholesale

Microporous Shoe Cover wholesale Our History Hiknow Medical company is a trusted and one of the world's leading provider of high quality infection,,single use and preventive products for the medical,dental,industrial,laboratory,health and beauty markets. We offer only carefully selected products that use superior materials and manufacturing processes to provide protection you can count on.Hiknow medical have a strong network of distribution guarantee global presence in cooperation with our business partners. Our Factory Hiknow medical Quality Management is the ethical basis our company was founded on.The production facilities are internationally certified ( ISO, CE,FDA etc.)and frequently conduct internal and third party inspections to guarantee that all of our products meet and exceed the standards required by our distributors. We believe the success of a long-term relationship with our clients is based not only on delivering the right product at the right price, but also reliability through constant improvement. Our vision is a global healthcare company with a customer-centric commitment to excellence. Our Product Non wowen protective products ,disposable face mask ,disposable isolation gown , disposable caps ,disposable shoe covers and disposable boot cover . Product Application Products to be used in medical, dental ,industrial ,laboratory, health and beauty markets. Our Certificate CE and FDA registration , passed NQA ISO 13485 Production Equipment Heat-sealing Machine 106 Sewing Machine 82 Cutting Machine 4 Casting Film Production Line 1 Laminating Machine 2 Face Mask Machine 10 Production Market Hiknow medical鈥榮 products are served for more than 40 countries worldwide and enjoyed good reputation in domestic and foreign markets. Our Service Hiknow medical is dedicated to creating customer partnerships through strong relationships, offering high-value,quality products and outstanding service through ongoing process improvement. We strive to provide distributors the most trusted branded and private label products and exceptional value.We bring the passion to everything which create for remarkable customer experiences. Microporous Shoe Cover wholesale website:http://www.hiknowmedicals.com/

Printing Ink Yellow

Printing Ink Yellow OUR FACTORY Guangdong Jiajing Technology Co., Ltd. (hereinafter referred to as Kagem), founded in 1999, specializes in the R&D, production and sales of water-based inks, water-based varnishes, water-based acrylic resins, water-based acrylic emulsions, pearlescent binders and other eco-friendly water-based printing materials. Our products can be applied to flexographic, gravure, spray coating or scrape coating printing processes of printing substrates such as paper, cardboard, plastic film, aluminum foil, etc., involving color coated paper packaging, corrugated carton packaging, plastic flexible packaging, pharmaceutical packaging and other printing industries. The company adheres to the business philosophy of "win-win cooperation and common development", Kagem has provided customized eco-friendly printing solutions for thousands of customers based on actual printing conditions. With over 20 years of experience and industry persistence, Kagem has become the largest manufacturer of eco-friendly water-based inks in China. The total investment of plant and equipment is several hundred million yuan, covering an area of over 25,000m虏 and the company has an annual output of more than 30,000 tons. Our independent R&D team, scientific quality management system and advanced production and testing equipments are the core competitiveness of the company. We have obtained 12 patents and the products are sold to over 30 countries at home and abroad. Keeping the craftsmanship spirit and the concept of sustainable development, Kagem will continue to promote the technological innovation and popularization of eco-friendly water-based inks, and lead the development of water-based ink technology to ceramics, wood, plastics and other substrates and high-end new products, so as to become a world leading enterprise of water-based ink. OUR PRODUCT Water based ink, Water-based Varnish, Water-based Polymer, Water-based Color Paste PRODUCT APPLICATION Fine packing box, Outer packing box, Food packaging, Logistics packaging, Daily necessities printing OUR CERTIFICATE USFDA standard, GB9685-2016 Standard, REACH standard of EU Chemical Safety Standards, EN71-3 safety standards for children's products, CONEG US Packaging Material Safety Standards, ROHS 2.0 EU Electronic Material Safety Standards, VOC limit requirements for cigarette packaging, MSDS.SGS, OK COMPOST INDUSTRIAL. PRODUCTION EQUIPMENT Fully automatic acrylic resin emulsion synthesis reactor, Automatic ink dispenser, Automatic batching tank, Automatic grinding and dispersing equipment, Large storage tanks, Constant temperature raw materials warehouse. Production Market Kagem is headquartered in Dongguan, Guangdong, it offers high-quality and timely services, and the company has set 8 direct sales service centers throughout the country, and cooperates with nearly 300 dealers. Our sales and service network covers all provinces and cities nationwide. The Foreign Trade Department of Kagem was established in 2012 and focused on the development of overseas market of water-based inks. The company has established long-term partnership with many foreign water-based inks agents and overseas water-based ink end users. Our products are sold to more than 30 countries around the world and the global sales network will continue to expand.Printing Ink Yellow website:http://www.kageminks.com/

Frosted Glass Water Bottle factory

Frosted Glass Water Bottle factory Item NamePortable Clear Frosted Glass Bottle Volume500ml Size5.5*21cm Outer coatingFrosted N.W400g MaterialFood grade glass MOQ1000pcs Lid option3 different colors Logo printingAvailable PackagingCustomized color box/cylinder box Packing20pcs/carton SamplesAvailable Delivery Time15-30 days About this model 鈼?nbsp;Food grade PC material 鈼?Water leakage prevention design, 360掳 seal leakproof 鈼?Cartoon fashionable, easy to carry 鈼?The perfect way to enjoy your favorite beverage in this bottle Different colors for lid FAQ 1. What鈥檚 the MOQ for this model? Our MOQ is 1000PCS, for customize color, it is 1000pcs per color 2. Can I customize our own color? Yes, you can customize your own color 3. What鈥檚 the lid material? The lid material is PP PLASTIC 4. Can we get a sample for quality checking? Yes, sample is provided. Both stock sample and OEM sample are available 5. What鈥檚 the delivery time for sample order? Usually 5-7 working days if customize sample. If stock sample, usually can ship in 1-2 days. 6. How you package your product? Is it strong enough? White box, cylinder box all are available. One in bubble bag, then put into white box and cylinder box. We can send you photos for reference if you are interested in.Frosted Glass Water Bottle factory website:http://www.lancewaterbottle.com/glass-water-bottle/frosted-glass-water-bottle/

Carcinoembryonic Antigen Test Kit Free Sample

Carcinoembryonic Antigen Test Kit Free Sample Our History Established in 2018, Chongqing MODA Biotechnology, Co., Ltd. is an innovative In Vitro Diagnosis (IVD) enterprise dedicated to the development, manufacture and sales for IVD reagents and instruments. The professional research team of the company research and develop new IVD products every year. Our Factory MODA has strong research and development strength and insists on independent research and development. Based on the scientific research team led by Longcheng Yingcai, in line with the concept of seeking truth and innovation, and caring for human health. Incubate 5 automated detection platforms and match 82 kits in different detection fields. The company has a clean workshop of 1,700 square meters and four production lines. The regular daily production capacity is 700,000-750,000 kits. Both production management and quality management personnel have rich experience in R&D and production of similar products. Relying on scientific and technological progress, the company constantly adjusts the product structure and strengthens the internal management of the enterprise, so that the enterprise has always maintained a good development trend. Our Product MODA plans three major detection platforms: point-of-care testing (POCT) platform, microfluidic biochemical detection platform, and molecular diagnostic detection platform. The products mainly cover inflammation detection series, diabetes detection series, cardiac marker detection series, cancer detection series, pregnancy detection series, chronic disease detection series, infectious disease detection series and other kit products and their supporting automated workstations. Product Application MODA have developed their own platform of time resolved fluorescence immunoassay (TRFIA), the rapid clinical diagnosis reagents based on the TRFIA technology offer high sensitivity, accuracy and wide linear range. To date, their products cover the fields of cancer, infectious, cardiovascular, renal, gastric, autoimmune diseases, etc. Chongqing MODA is devoted to the field of POCT, struggling for providing excellent medical diagnosis products and technology services. Based on the advanced technology resources and professional team, MODA provide more rapid and accurate test methods to assist physicians to propose more effective treatment options which can improve the efficacy. The company aims to enhance people鈥檚 life quality and reduce the medical cost of the society through their products. Our Certificate CE, ISO13485 Production Market MODA participates in international medical exhibitions every year. We have obtained CE certificate, ISO 13485 quality system certification, production license, and marketing license of origin country. We are also preparing to apply for FDA and many more certifications. MODA distributes high-quality products at very competitive prices to benefit the society, and its sales network has covered many countries and regions around the world. We are committed to making the world a better place by providing people with high-quality products and services, and have won a good reputation around the world with high-quality products and professional services.Carcinoembryonic Antigen Test Kit Free Sample website:http://www.modaivds.com/

Vacuum Packing Machine

Vacuum Packing Machine Ouxin OX-540C touch convex cover vacuum machine vacuum bag sealing machine Product parameters ModelOX-440COX-540COX-640COX-640SC Voltage110-220v/50-60hz Power of pump900w900W900W1.8KW Heat-sealing power500w500W500W700W Lower absolute pressure1.33kpa Volume of vacuum case (mm)440*400*10540*500*150640*600*150640*600*150 Sealing strip size (mm)420*10520*10600*10600*10 Number of heater2pcs Material of vacuum case and hullStainless steel Exhaustment of vacuum pump20m鲁/h20m鲁/h20m鲁/h40m鲁/h Dimension (mm)550*570*760650*665*770650*765*780650*765*780 Weight (kg)65kg95KG110KG125kg Features of OXIN Touch Vacuum Machine OX-540C 1.Automatic processing of vacuuming, sealing, printing and cooling 2.Widely used in vacuum packaging for food, medicine, aquatic, chemical, electronic and other industries. It can prevent products from oxidation, mildew, corrosion and moisture, maintain quality and freshness, and prolong storage time. 3.Provide perfect solution for food safety and kitchen cooking with convenient service Wuyi Ouxin Packaging Machinery Co., Ltd. WuYi OuXin Packaging Machinery Co., Ltd was established in 2014, which located in WuYi ,ZheJiang ,China. It is a professional company specialized in manufacturing and marketing vacuum packaging machines, filling machine,and related materials such as packing bags and so on . Our packaging machine is widely used to the packaging of food,medical products,chemical,commodities and etc with the characteristics of reasonable designs, simple operation and superior quality with competitive price . The products have passed authoritative certification of ISO9001 and CE . All the indexes are in line with international standard. Welcome to visit us and get more cooperation. Packing & DelieryVacuum Packing Machine website:http://www.ouxinpacks.com/vacuum-packing-machine/

Magnetic Power Bank manufacturers

Magnetic Power Bank manufacturers Product Introduction The portable magnetic power bank has a beautiful and compact appearance. The product supports format logo customization: laser engraving, silk screen logo, color box printing, carton customization, and various solutions. Product Specification Product namePortable Magnetic Power Bank ModelCX50 FeaturesQuick charge support,magnetic,wireless charger Power10W Input5V/3A Output5V/3A MaterialABS+PC Product size88*55*12.5mm Weight127g ColorWhite,blace锛実reen锛宐lue Wireless output15W Prodection Details 鈻?Strong magnetic force: portable magnetic wireless power bank, you can take pictures while charging, small size, one-touch, precise positioning makes wireless charging faster and easier 鈻?Seamless adsorption and one sticking: corresponding to the magnetic patch in the mobile phone case, to prevent the situation of non-fitting and scalding the machine 鈻?18W two-way fast charging: The USB-C port supports fast charging for the mobile power supply itself, and the corresponding fast charging configurator is used to charge itself. The input can reach 18W Max, which greatly shortens its own charging time. Production process FAQ 1.Can I get the sample order? A: Yes. We welcome sample order to test and check quality. Mix sample are acceptable. 2.How do you ship the goods and how long does it take arrive? A: We usually ship by DHL, EMS, Fedex or TNT. It usually takes 6-8 work days to arrive. But it will depend on different areas. 3. Can I print my logo on the products? A: Yes, we can print your logo on the products. We can offer free printing Logo if the order quantities over 1000pcs. 4.Do you offer guarantee for the products? A: Yes, we offer one year warranty for the product. 5.How do I pay for my purchase? A: We accept the following payment methods: T/T, Western Union, Paypal, L/C.Magnetic Power Bank manufacturers website:http://www.plainetechs.com/power-bank/magnetic-power-bank/

14 Inch Quartz Saw Blade

14 Inch Quartz Saw Blade 鈥?Our History 1993-Saint-Horse Diamond Tools Co., Ltd. was founded in Mashan village, Ezhou city 2004-Unity Qirui Saw Industry Co., Ltd. was founded in Chihu village, Ezhou city 2016-Two enterprises were mergered and reorganized into Hubei St. Bairui Diamond Tools Co., Ltd. 2017-Enterprise completed automation and digital transformation, product quality was comprehensively improved 2018-Released the new vision of "ingenuity and Intelligent manufacturing, openness and inclusiveness and win-win future" 2019-Successfully auctioned new industrial land and laid the foundation stone to build an industrial zone 2021-The company was overall moved to the new industrial zone to meet the new journey...... 鈥?nbsp;Our Factory The total investment of the company's new factory is 200 million yuan, covering an area of about 63 acres. The total planned construction area of the project is 48,100 M虏. After the project is completed and put into production, it is expected to form an annual output value of 150 million yuan, annual profits and taxes of more than 10 million yuan, and employment of more than 200 people. St. Bairui is a high-tech enterprise integrating R&D, production, sales and service of high-precision diamond tools. The company owns well-known brands such as "Carbon Rubik's Cube", "Jucheng" and "Saint-Horse". The main products include diamond saw blade steel blank; professional high frequency welding saw blade for marble銆?dekton銆?ceramic銆?granite銆?quartz stone etc; and concrete, asphalt laser/ high frequency welding construction saw blade; concrete, stone laser/ high frequency Welding drill bits; Concrete grinding discs and engraving discs; Brazing discs for stone and emergency rescue; small grinding and cutting discs; Soft polishing pads for stone and concrete floors etc. The company independently develops and produces various diamond tools, which are widely used in construction, stone processing, airport and highway projects and other non-metal processing fields and industrial metal processing fields. The three core products, diamond circular saw blade steel blank, provide sufficient raw materials for the Ezhou diamond industry cluster; the fist products marble and dekton saw blades occupy an important market share; high-tech laser welding industrial saw blades will be the company's most distinctive highlight product in the future. it will expand the diamond tools from the traditional non-metal processing field to the industrial metal processing field, the product application will be more extensive, and the market prospect will be broader. 鈥?nbsp;Our Product 1: Stone cutting blade; 2: Laser/high frequency welding diamond saw blade; 3: Concrete/high frequency welding dry/wet core drill bits; 4: Grinding and polishing discs; 5: Small cutting discs; 6: Multi blade and diamond segments etc. 鈥?nbsp;Product Application Our products is widely used in stone processing銆?construction銆?airport and highway projects銆?other non-metal processing fields and industrial metal processing fields. 鈥?nbsp;Our Certificate 鈥?nbsp;Production Equipment 1: Full automatic laser cutting machine; 2: High precision automatic welding machine 3: Full automatic CNC grinding machine 4: Full automatic side grinding machine 鈥?nbsp;Production Market Our products sell well in Europe, South America, North America, the Middle East, Southeast Asia and other regions 鈥?nbsp;Our Service Pre-sale: Understand the specific needs of customers, the power and speed of the used equipment, and the specific conditions of the application objects etc; recommend suitable products or develop targeted samples for customer testing. On sale: Strictly control product quality, deliver goods in time and track logistics and transportation. After-sales: Provide customers with reasonable use and operation suggestions, and make appropriate adjustments to products according to customers' feedback and requirements14 Inch Quartz Saw Blade website:http://www.springdiamondtool.com/

CE FFP2 Face Mask made in China

CE FFP2 Face Mask made in China Specification itemCE FFP2 Protective Face Mask Place of OriginShenzhen, China Brand NameSUNWAY Model NumberSW-0615 Size15.5*10.5cm TypeMedical Face Mask EN149-2001+AI-2009 Adult BFE 鈮?5% Shelf Life2 years Quality CertificationCE Safety standardEN 149 -2001+A1-2009 Instrument classificationClass II MaterialNon Woven Fabric +Melt blown filter fbric ColorWhite Layer5 Layers CertificateCE EN 149 -2001+A1-2009 Free SampleWithin 10 Pieces LogoCustomized Logo Accept ShapeFlat Fold KeywordFFP2 CE marking Package40pcs/box, FAQ Q1. Who are we? A: We are based in Shenzhen, China, start from 2001,sell to Domestic Market(55.00%), South America(8.00%), Eastern Asia(8.00%), Western Europe(7.00%),Northern Europe(5.00%), Eastern Europe(4.00%), Southeast Asia(4.00%), North America(3.00%),Southern Europe(3.00%), South Asia(3.00%). There are total about 51-100 people in our office. Q2. How can we guarantee quality? A: Always a pre-production sample before mass production; Always final Inspection before shipment; Q3: What can you buy from us? A: Medical Product Q4. Why should you buy from us not from other suppliers? A: Focus on non woven filter material over 4 years OEM/ODM are welcome 100,000-Level Purification Workshop CE/TUV Certification Free sample offer Q5. what services can we provide? A: 1. Accepted Delivery Terms: FOB,CFR,CIF,EXW,Express Delivery锛?/p> 2. Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF; 3. Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,Western Union,Cash; 4. Language Spoken:English,ChineseCE FFP2 Face Mask made in China website:http://www.sunwaysarscov2tests.com/face-mask/ce-ffp2-face-mask/

China Piezo Buzzer suppliers

China Piezo Buzzer suppliers Our History Changzhou FHD electronics Co., ltd is a production-oriented enterprise, which is established in 2010. We are specialized in producing buzzers, speakers, alarms, microphones and other electric acoustic devices. So far there are about 200 employees in our company. Our Factory Our factory is located in Changzhou City Jiangsu Province which has strong industrial base and convenient transportation, it covers an area of about 5000 square meters. Also there are our offices in Shenzhen and California. Our Product There are so many products in FHD, such as Mylar Speaker, Buzzer, Receiver, Microphone, Alarms and so on. Besides manufacturing the acoustic components, we also strive to design and provide complete solutions for your acoustic products demands. Product Application Our products are widely used in healthcare, auto, household appliances and security industry. Our Certificate We passed the certifications of ISO9001 and IATF16949 in 2011, we've got 22 patent certificates. Production Equipment To help customer develop products and effectively shorten the customer developing time, we set up injection mould workshop, 3D printer and 3 meter Anechoic room. We have ten fully automated piezo buzzer (spring contact) production machines, from feeding materials to fully tested finish product in a single fully automated machine, and it's daily capacity exceed 360,000 pieces. Besides we've got 13 Automated winding machine and several Automated grinding magnet ring machine, Automated diaphragm installation, Automated cover installation, Automated Visual Gluing Machine, Automated Visual Micro Spot Welding Machine, Automatic positioning glue machine, to improve Automated Production Process. Production Market Our company has worldwide customers from USA, Germany, Korea, Netherlands and some other countries. Up to now, we are cooperating with Flextronics, Chrysler, Electrolux, Roche, Johnson Controls, Panasonic and so on. We've got 88 million yuan sales in 2021. Our service Besides our existing molded products, we can also make products according to customers' requests, including buzzers, speakers, especially alarms. We control the product quality critically for every step during the manufacturing from raw material purchasing to finished products testing and packaging. We will continue to pay attention to the use of the product on the client side, and also follow up on customer's feedback.China Piezo Buzzer suppliers website:http://www.czfhds.com/

fashion Zipper Pouch with Three Side Seal

fashion Zipper Pouch with Three Side Seal Company Profile Wenzhou Feiao Packaging Co.,LTD was established in 2013, covers area more than 20,000 square meters with standard workshop in Pingyang Binhai New District. 32KM away from WENZHOU LONGWAN International AirPort, it takes about 40mins from WENZHOU airport by car and one and half hours from Shanghai airport to Wenzhou Airport. Enjoying convenient traffic conditions. Our Product We are profession manufacturer that supply excellent quality of paper and plastic flexible packaging solutions for Ice Cream銆丏rinking銆丗ast Food Industrials銆乴iquid, ketchup, sauce, Juice, yoghurt, soymilk, blister toys, plastic films, etc. Our Advantages Wenzhou Feiao Packaging Co., Ltd. was established in 2013, covering an area of more than 20000 square meters. It has a standard factory in Binhai New Area, Pingyang. We have more than 35 kinds of products, more than 5000 daily production, more than 200 employees, and customer service is available 24 hours a day. Experience Since 2013 Member 200+ People Service 24 Hours Area 20000 銕?/p> Daily Output 5000+ Products 35+fashion Zipper Pouch with Three Side Seal website:http://www.feiaopouch.com/

Thrust Ball Bearing for sale

Thrust Ball Bearing for sale Product Details Category Thrust ball bearing-One Way Thrust Ball Bearings-51101 BrandHAXBEnclosureopen Diameter-Metric12*26*9MMNumber of rowsSingle row Weight0.019 KilogramRolling ElementBall Bearing Ring MaterialGcr15 Chrome SteelCage MaterialSteel Precision ClassABEC-3 | ISO P6HS Code8482.10.10.00 Internal Clearance/Mounting MethodShaft Product Introduction One-way thrust ball bearing 鈼?Contains a shaft washer, a seat washer, and a set of ball and cage assemblies. 鈼?Axial loads and axial positioning in only one direction. The one-way thrust ball bearing is a separate type, and the shaft washer, seat washer, and steel ball-cage assembly can be installed separately. There are two types of small one-way thrust ball bearings, which are with flat seat ring or with self-aligning seat ring. Bearings with self-aligning seat washers can be used with self-aligning seat washers to compensate for angular misalignment between the support surface in the housing and the shaft. Relevant Model Bearing TypeBearings Size/Metric d/mmD/mmB/mm 5110112269 5110215289 5110317309 51104203510 51105254211 51106304711 51107355212 51108406013 51109456514 51110507014 51111557816 51112608517 51113659018 51114709518 511157510019 For more bearing numbers, please kindly contact us.Thrust Ball Bearing for sale website:http://www.haxbbearings.com/ball-bearings/thrust-ball-bearing/

Computer Chair Free Sample

Computer Chair Free Sample Introduction Office Chair with Chromed Steel Base is a chair that has become popular in places where we live, work, and study. Because of the need to provide convenience for sedentary people, our products are ergonomically designed to try to keep your sitting posture in the natural form of the human body to protect your health. Our base is designed in chrome. Chrome plating is a widely used coating for protection or decoration, which can make products brighter and more resistant to corrosion. So our products have a long service life. The seat cushion is curved, which is more suitable for the shape of the butt. In addition, we have a variety of colors to choose from, which can be used to match the style of your room or office. Features * Ergonomically Designed Home Office Desk Chairs for Maximum Comfort - With wing lumbar support and a thick padded seat. Good for gaming, working, and long hours of study at your desk. * Breathable mesh fabric allows you to sit for long hours in summer without feeling hot. * The tilt mechanism of the Office Chair with Chromed Steel Base allows you to sit as you wish. You can focus on the game with an ergonomic chair that will support you for hours. * Our computer desk chairs are made of sturdy and durable materials and can be easily adjusted in height. You can easily assemble it with step-by-step instructions. Details: Product Nameoffice chair with chromed steel baseBrandHeRui Materialsteel + MeshColorCustomized Model NumberW05FoamRecycled foam+ fresh foam armrestFixedmechanismtilt mechanism Gas lift100MM Class 2base300MM nylon base caster50MM PU casterITEM SIZEW60*D61*90-100cm LOADING ABILITY835PCS/40HQ 1PC/CTNSampleFree sample available PaymentT/T, L/C, otherPackingAs customer requiredComputer Chair Free Sample website:http://www.herui-chairs.com/office-chair/computer-chair/

Hisense backlight repair manufacturers

Hisense backlight repair manufacturers Product Introduction Es-494 LED TV Backlight for Tcl 55 Inch Tmt55p18x4 LED Backlight Strips are long and flexible. You can modify it as required during installation. Our product is shearable. If the length is too long, you can cut it off. If its length is not long enough, you can also combine it with related products and extend it. At the same time, the design of its interface, light distance, and other parameters are consistent with the product, so the installation is very simple. Finally, our products are popular with customers because of their reasonable price and stable quality. Product Features Es-494 LED TV Backlight for Tcl 55 Inch Tmt55p18x4 LED Backlight Strips are installed in flexible plastic, and the power path is completely covered, so it has good insulation and water resistance. Secondly, due to its strong weather resistance, it can be used in a variety of environments. The thickened aluminum substrate with good heat dissipation makes it high in strength and does not generate heat after a long time of use, and its service life can reach more than 8 years. Finally, our products use high-quality lamp beads, the light is very soft, won't hurt your eyes, and is not easy to fall off and safer. Product Specification ModelES-494-L/4,ES-494-R/4 Complete Set9PCS锛?L+1R锛?/span> PCB MaterialCopper/Aluminium UsageTV Repair and replacement Part NumberTMT_55P1_8X4+1X4 Manufacturer Part NumberTMT_55P1_8X4+1X4 TV Panel NumberN/A Board NumberTMT_55P1_8X4+1X4_2121C_L_4S1P REV.V5 TMT_55P1_8X4+1X4_2121C_R_2S1PX2 REV.V5 Warranty180-Day Warranty Compatible models TCL 55P1 TCL B55A769UHisense backlight repair manufacturers website:http://www.ledtvstrips.com/led-tv-backlight/led-tv-backlight-for-tcl/

Customized Big Stainless Steel Sheet PVD Coating Machine

Customized Big Stainless Steel Sheet PVD Coating Machine All of the benefits of the PVD Coating process that produce some of the toughest, most brilliant and cutting edge technology of our time ranging from microchips to solar panels, none is more important than the fact that PVD Coatings can be applied with no toxic residues or byproducts which degrade our planet鈥檚 environment. Craft of Metallizing coating machine Sputter coating process concept The so-called sputtering coating refers to bombarding the target with energetic particles (such as positive ions) in a vacuum chamber, so that the atoms or atomic groups on the surface of the target escape, and the escaped atoms form a film on the surface of the workpiece with the same composition as the target. , this method of preparing thin films is called sputtering. At present, sputtering is mainly used to form metal or alloy thin films, especially for making electrodes of electronic components and infrared reflective films on glass surfaces. In addition, sputtering is also used to prepare functional thin films, such as In2O3-SnO2 transparent conductive ceramic thin films for liquid crystal display devices. There are two ways of sputtering coating: one is called ion beam sputtering, which refers to bombarding the target surface with an ion beam in a vacuum state, so that the sputtered particles form a film on the surface of the substrate. This process is relatively expensive and is mainly used to prepare special The other is called cathode sputtering, which mainly uses the phenomenon of low-pressure gas discharge, so that the ions in the plasma state bombard the target surface, and the sputtered particles are deposited on the substrate. It adopts a parallel plate electrode structure, a large-area target made of membrane material is a cathode, and a substrate supporting the base is an anode, which is installed in a bell-jar type vacuum container. In order to reduce pollution, the pressure in the bell jar was first pumped to less than 10-3~10-4Pa, and then filled with Ar to maintain the pressure at 1~10Pa. A voltage of several thousand volts is applied between the two electrodes for sputter coating. Compared with evaporation coating, the target material (film material) has no phase change during sputtering coating, the compound composition is stable, and the alloy is not easy to fractionate, so the film material suitable for preparation is very wide. Since the energy of the particles deposited on the substrate by sputtering is 50 times higher than that of the evaporation, they have the effect of cleaning and heating the substrate, so the formed film has strong adhesion. In particular, sputtering coating is easy to control the composition of the film. Through direct sputtering or reactive sputtering, various alloy films, compound films, multi-layer films and composite films with large and uniform areas can be prepared. Sputtering coating is easy to realize continuous, automated operation and large-scale production. However, due to the use of high voltage and gas during sputtering, the device is relatively complicated, the thin film is easily affected by the sputtering atmosphere, and the thin film deposition rate is also low. In addition, sputtering coating needs to prepare targets of various components in advance, which is inconvenient to load and unload the target, and the utilization rate of the target is not too high. Parameter Application Our companyCustomized Big Stainless Steel Sheet PVD Coating Machine website:http://www.lk-bts.com/big-stainless-steel-sheet-pvd-coating-machine/

Titanium Stem Parts

Titanium Stem Parts Our History Nanjing Morong Machinery Technology is located in Nanjing City, Jiangsu Province, China. We are one of the leading professional manufacturers and exporters of custom precision CNC machining parts, integrating design, prototyping, mass production, assembly, sale and service under one roof. Our Factory We have more than 2500 square meters production area totally. With more than 15 years' experience, we offer full rage of CNC Machining Service which contains CNC turning , CNC Milling, Grinding, Drilling, EDM Cutting, Laser Cutting, Polishing, etc.. Heat treatment (quenching, tempering, hardening, QPQ, Nitriding, etc鈥? and surface treatment (Zn Coating, Zn/Fe Coating, Zn/Ni Coating, E-coating, Powder Coating, Blackening, Anodizing, Hard Anodizing, Cr Coating, DLC coating, Bright dip, etc鈥? are also available by our cooperated factories. All our operations are controlled under ISO 9001, ensuring high quality all the time. We approach each job with the intention of minimizing run-time by reducing the number of operations, therefore increasing accuracy and efficiency while decreasing cost. Our Product CNC Machining Parts, CNC Milling Parts, CNC Turning Parts, Laser Cutting Parts, EDM Cutting Parts, Lasering, Casting+Machining parts, Forging+Machining parts and other Customized Parts made in carbon steel, alloy steel, aluminium, titanium, brass, nylon, POM, etc鈥?and Parts Assembly Product Application Our parts are all customized and applied to mechanical equipments, motorcycles, bicycles, automotive, solar equipments, medical equipments, locks, elevators, mirror accessories, etc鈥?/p> Our Certificate ISO9001:2015 Production Equipment CNC Centers 20 sets; CNC Turning Lathes 25 sets; Drilling Machines 4 sets; Metal Sawing Machine 2 sets; Laser Cutting Machine 1 set; Laser Engraving Machine 1 set; Tube Expanding/Shrinking Machine 1 set, Ultrasonic Washing Machine 1 set; Magnetic Polishing Machine 1 set; Projector, CMM, Digital Height Meter, Roughness Tester, etc鈥? Production Market Our parts are mainly exported to North America, South America, Europe, Australia, Japan, South Korea, Southeast Asia, etc鈥?/p> 2021 Annual Export Amount: USD2.8 Million 2020 Annual Export Amount: USD2.2 Million Our Service Company Mission: Creating value for customers with our excellent engineering service. We promise: No MOQ request; Production Visualization; Fast Delivery and Regular Order Follow-up Service How to Work with us: 1. Sending drawings or samples to us. 2. Technical Analysis and Offering Quotation. 3. Start manufacturing once all technical and business details confirmed.Titanium Stem Parts website:http://www.mr-machining.com/

Luxury Grey Armchair price

Luxury Grey Armchair price Introduction The Luxury Automatic Massage Chair offer maximum comfort and relaxation with innovative features that are unmatched by standard models. From 3D and 4D massage technology to voice control functions, products tailored to your needs will enable you to reach the absolute pinnacle of relaxation. Secondly, our heating module helps to soothe your muscles so that your body is better prepared for the benefits of a massage. Nothing is more important than the small vents in the headrest of our products to remove dust, dander and other irritants from the air, resulting in a healthier intake of oxygen. Finally, our products also conform to the curves of the body so that you don't get tired after sitting for long periods of time. Feature The unique J-track design of Luxury Automatic Massage Chair combines L-track and S-track technology for optimal spinal decompression and hip massage. Choose from low, medium or high roller strength for areas such as the neck and shoulders, upper and lower back, arms, legs and feet. Secondly, our products can be adjusted to the height and weight of the user, allowing for a true fit for each individual. More importantly, it has a kneading mode to soften and relax the muscles. Product model:YJ-A2905SLHJ Rated power:150W Product size:146 x 76 x 125cm Package dimensions:137 x 78 x 113cm Leather material:Hydrolysis resistant PU leather Applicable height:150-190cm N.W/G.W:88KG/108KG Flat panel high-definition display:Smart and convenient touch operation AI voice control:Intelligent voice control system, can operate automatically when you move your mouth Relieve fatigue:Whether it is young people who work from 9:00 am to 6:00 pm, or middle-aged and elderly people who have entered retirement life, everyone will inevitably have more or less pressure in daily life. Arm soreness, shoulder and neck stiffness, low back pain and other problems can be easily stretched out through the massage chair. The manipulator in the massage chair is like the hand of an old master, which can penetrate deep into the fascia layer and remove accumulated lactic acid, thereby relieving the muscles. Soreness and relaxation. Improve sleep quality:Sleep has become something that humans look forward to but do not pay attention to. There is always more use of mobile phones before going to bed, and some external pressure will also lead to insomnia and dreaminess. Some businesses have done relevant research and confirmed that Using a massage chair for one month in a row can improve sleep quality. The function of the zero gravity + hot compress + massage of the massage chair, which makes people relax, and naturally, it is easier to fall asleep.Luxury Grey Armchair price website:http://www.re-massagechairs.com/luxury-armchair/luxury-grey-armchair/

Natural Carotene in stock

Natural Carotene in stock Natural Carotene Powder Product Item No: NC-1 CAS:7235-40-7 Molecular Formula: C40H56 Molecular Weight: 536.88 Natural Carotene is a member of the carotenoids, which are highly pigmented (red, orange, yellow), fat-soluble compounds naturally present in many fruits, grains, oils, and vegetables (green plants, carrots, sweet potatoes, squash, spinach, apricots, and green peppers). Alpha, beta, and gamma carotene are considered pro-vitamins because they can be converted to active vitamin A. Our natural carotene powder is water-soluble food color which is extracted from palm oil. It is 100% herbal extract that can be used in any food with no limit for usage. Function 1) Have functions of anti-tumorcaducity resistance and anti-oxidation etc. And it can improve of AIDS patients. 2) Maintain the Integrity of the skin mucous membrane layer, preventing skin dry and coarse 3) Improve growth rate and flesh quality of animals 4) Eye protection, delay aging effects Application 1) Pharmaceutical industry 2) Food industry as food pigment 3) Cosmetics Industry Production Flow Packing & Delivery Package 1kg per Aluminum foil bag 20kg per carton boxes or 25kg/drum Delivery Time Within 3~7 days after order confirmed FAQ -- Can you provide free samples? A: Yes we can provide free samples. Only the shipping cost will be on customer鈥檚 account. You can pay the sample鈥檚 shipping cost to us or arrange a courier to collect the samples. -- How to confirm the products quality before placing order? A: Before placing the bulk order, we can offer free samples to you for quality check. And if you have special requirement on the goods, we can prepare samples according to your requirement and send to you for your confirmation. -- Is there any discount? A: Yes, for large quantity, we can offer a much better price based on it. -- What kind of payment method do you support? A: T/T, L/C, West union, Wechat etc -- What is the delivery time after order confirmed? A: Usually within 3-7 days after order confirmed. -- What is the delivery method? A: It depends on customer鈥檚 prefer. We can ship by express way(DHL/UPS/FEDEX etc), by air or by sea. -- What's your shipping port? A: We can ship to any domestic shipping port(Shanghai, Ningbo, Guangzhou, Shenzhen etc), the domestic shipping cost will be on our side.Natural Carotene in stock website:http://www.sldcarotene.com/natural-carotene/

Waiting Room Chair

Waiting Room Chair This Doctors waiting room chairs is an adaptation of a featured design by Waltz Medical Studio and is characterized by its comfort and extendibility. Comprising of an epoxy metal frame, stained to house color of white, black, silver, the seat features with a comfy seat and back shell and upholstered from a selection of house fabric and leather. Manufactured by Waltz Medical production line in China but to exceed international strength and durability, the frame is super sturdy made of powder coated steel and fat padded cushion seat and back shell is inviting, it鈥檚 coming with 1 single arm chair, 2 or 3 seaters beam seating with PU armrest, all the strong features let this doctors waiting room chairs a range of functional, versatile and playful waiting room visitor chairs that are idea for a wide variety of applications. Features: *Medical grade vinyl upholstery * Silver epoxy metal frame * PU padded armrest * Available by single, double & three seatsWaiting Room Chair website:http://www.waltzmeds.com/medical-seating/waiting-room-chair/

China Spherical Roller Bearing

China Spherical Roller Bearing Spherical roller bearings have double row rollers, the outer ring has a shared spherical raceway, and the inner ring has two raceways that are inclined at an angle relative to the bearing axis. This ingenious structure enables it to have self-aligning performance, so it is not easily affected by the angle between the shaft and the bearing box seat on the error or the shaft bending, and is suitable for the occasions where the installation error or the shaft deflection causes the angle error. In addition to radial loads, the bearings can also withstand axial loads acting in both directions. Spherical roller bearings have two types of inner holes: cylindrical and conical, and the taper of the conical taper hole is 1:30 and 1:12. This conical inner hole bearing is equipped with an adapter sleeve or a withdrawal sleeve. The tapered inner hole self-aligning ball bearing can be easily and quickly assembled on the optical shaft or the stepped machine shaft. The models of spherical roller bearings are: spherical roller bearing (type 20000CC); spherical roller bearing with tapered hole (type 20000CCK); spherical roller bearing (type 20000CC/W33); spherical roller bearing with tapered hole (Type 20000CCK/W33); Spherical roller bearing mounted on the adapter sleeve (Type 20000CCK+H); Spherical roller bearing mounted on the adapter sleeve (Type 20000CCK/W33+H) There are 6 types in total. Specific introduction Spherical roller bearings have two rows of rollers, which mainly bear radial loads, as well as axial loads in either direction. It has high radial load capacity, especially suitable for working under heavy load or vibration load, but cannot bear pure axial load. The outer ring raceway of this type of bearing is spherical, so its self-aligning performance is good, and it can compensate for the coaxiality error. There are two rows of symmetrical spherical rollers, the outer ring has a common spherical raceway, and the inner ring has two raceways inclined at an angle to the bearing axis, which has good self-aligning performance. The bearing can still be used normally, and the centering performance varies with the bearing size series. Generally, the allowable centering angle is 1~2.5 degrees. The load capacity of this type of bearing is large, and the bearing can withstand radial load in addition to radial load The axial load acting in both directions has good impact resistance. Generally speaking, the allowable working speed of spherical roller bearings is low. Spherical roller bearings are divided into two different structures: symmetrical spherical rollers and asymmetric spherical rollers according to the cross-sectional shape of the rollers. Asymmetric spherical roller bearings are early products, mainly for main engine maintenance services, newly designed main engine Symmetrical spherical roller bearings are rarely used at this time. The internal structure has been comprehensively improved and designed and parameters are optimized. Compared with the early production spherical roller bearings, it can withstand greater axial load. The operating temperature of this bearing is The bearing is relatively low, so it can meet the requirements of higher speed. According to whether the inner ring has ribs and the cage used, it can be divided into C type and CA type. The characteristics of C type bearings are that the inner ring has no ribs and adopts steel plates. Stamping cage, CA type Trien bearing is characterized by ribs on both sides of the inner ring and the use of car-made solid cage. In order to improve the lubrication of the bearing, the spherical roller bearing with an annular oil groove and three oil holes in the outer ring can be provided to the user, which is represented by the bearing rear code /W33. Spherical roller bearings with inner ring oil holes can also be supplied according to the user's requirements. In order to facilitate customer loading, unloading and replacement of bearings, spherical roller bearings with tapered inner holes can also be provided. The taper taper is 1:12 , It is represented by the post code K. In order to meet the requirements of special users, bearings with an inner hole taper of 1:30 can also be provided, and the post code is K30. Bearings with a tapered inner hole can be directly mounted on the tapered journal with a lock nut, or mounted on a cylindrical journal with the help of an adapter sleeve or a withdrawal sleeve. In order to ensure that the bearing prevents harmful slippage between the raceway and the roller due to centrifugal action when the bearing is running at high speed, the bearing should bear a certain minimum radial load, which can be estimated as follows: Fr =0.02C where: Fr -- minimum radial load N C鈥攖he basic dynamic load rating N of the bearing Equivalent Dynamic Load P=Fr+Y1Fa when Fa/F e P=0.67Fr+Y2Fa when Fa/F e where: P鈥攅quivalent dynamic load N Y1 Y2鈥攁xial dynamic load factor Equivalent static load P0=Fr+Y0Fa where: P0鈥攅quivalent static load N Y0鈥擜xial static load factor Structural classification structure type Spherical roller bearings are divided into: cylindrical bore, conical bore. The taper of the tapered inner hole is 1:12 for the rear-mounted spherical roller bearing (type 153000 or 113000) with the rear code K30 and the 1:30 rear-mounted spherical roller bearing with the code name K30. When this type of bearing is matched with a conical shaft, the radial clearance of the bearing can be adjusted by moving the inner ring in the axial direction. Postcode Install the tapered hole spherical roller bearings with the rear code K and K30 on the matching adapter sleeve, and then become the rear code K+H type and K30+H type bearings. This kind of bearing can be installed on the optical shaft without shoulder, and is suitable for occasions where the bearing needs to be installed and removed frequently. In order to improve the lubricating performance of the bearing, there is an annular oil groove on the outer ring of the bearing and three evenly distributed oil holes are drilled, and the rear code is W33. Use and installation Mainly applicable cage: stamped steel plate reinforced cage (suffix E, very few in China). Stamped steel plate cage (suffix CC), glass fiber reinforced polyamide 66 cage (suffix TVPB), machined brass two-piece cage (suffix MB). Machined brass integral cage (suffix CA), stamped steel cage for vibration applications (suffix JPA). Brass cage (suffix EMA) for vibration applications. For the same structure, the code on the bearing may be different. Main uses: papermaking machinery, reduction gear, railway vehicle axles, rolling mill gearbox bearing housings, rolling mill rolls, crushers, vibrating screens, printing machinery, woodworking machinery, various industrial reducers, vertical self-aligning bearings with seats .聽 Install Spherical roller bearings are equipped with drum-shaped roller bearings between the inner ring with two raceways and the outer ring with spherical raceways. The center of curvature of the outer ring raceway surface is consistent with the center of the bearing, so it has the same self-aligning function as the self-aligning ball bearing. When the shaft and housing are deflected, the load can be automatically adjusted and the axial load in two directions. Large radial load capacity, suitable for heavy loads Shock load conditions. The inner diameter of the inner ring is a bearing with a tapered bore, which can be directly mounted. Or install it on the cylindrical shaft using an adapter sleeve and a dismantling sleeve. The cages use steel stamping cages, polyamide forming cages and copper alloy turning cages. For self-aligning bearings, the use of an intermediate mounting ring prevents tilting and rotation of the outer ring when installing the bearing with a shaft into the housing shaft hole. It should be remembered that some sizes of self-aligning ball bearings have balls that protrude out of the sides of the bearing, so the middle mounting ring should be recessed to prevent damage to the balls. A large number of bearings are generally installed mechanically or hydraulically.聽 For separable bearings, the inner ring and outer ring can be installed separately, which simplifies the installation process, especially when the inner and outer rings need an interference fit. When installing the shaft with the inner ring in place into the bearing housing including the outer ring, you must pay attention to check whether the inner and outer rings are correctly aligned to avoid scratching the bearing raceway and rolling parts. Mounting sleeves are recommended for cylindrical and needle roller bearings with inner rings without flange rib or inner ring with flange on one side. The outer diameter of the sleeve should be equal to the inner ring raceway diameter F, and the machining tolerance standard should be d10. Drawn cup needle roller bearings are best mounted with mandrels. Clearance For the installation axial clearance of the spherical roller bearing, the adjustment nut on the journal, the adjustment washer and the thread in the bearing seat hole can be used, or the preload spring can be used to adjust. The size of the axial clearance is related to the arrangement of the bearing during installation, the distance between the bearings, and the material of the shaft and the bearing seat, which can be determined according to the working conditions. For spherical roller bearings with high load and high speed, when adjusting the clearance, the influence of temperature rise on the axial clearance must be considered, and the clearance reduction caused by temperature rise must be estimated, that is, the axial clearance The gap should be appropriately adjusted to be larger. For bearings with low speed and vibration, they should be installed without clearance, or installed with preload. The purpose is to make the rollers and raceways of spherical roller bearings have good contact, distribute the load evenly, and prevent the rollers and raceways from being damaged by vibration and impact. After adjustment, check the axial clearance with a dial gauge. The method is to fix the dial indicator on the fuselage or bearing seat first, so that the dial indicator contact can withstand the smooth surface of the shaft, and push the shaft left and right along the axial direction. The maximum swing of the dial is the axial clearance value. Pay attention to the problem The preloading force of the spherical roller bearing is carried out at room temperature, but in the working state, the drive shaft caused by the micro-stretching temperature of the system will change the bearing preloading force. Therefore, the set preloading force should be considered. to this factor. It requires the ability of size, speed, and other conditions to set the reasonable use of spherical roller bearing preload to ensure the life of the transmission. If the preload is too large, the power consumption may even lead to overheating. If the preload is too small, under the action of the body load, the shaft rolling, and the gap between the outer rings, there will be beating, running, and the transmission accuracy will increase to reduce noise, affect the gear meshing, and severely damage the teeth and bearings. According to different spherical roller bearing assemblies, such as: directly by the axial compression of the inner bearing inner ring, the bearing preload nut is rotated, and the inner and outer rings are rotated to eliminate the gap and achieve the purpose of bearing preload. Achieving common use: first, well over the preloaded bearing, last of the nut, then back 1/4 turn. Assembly method, the advantages of this method are less investment, simple, practical, and consistent with the premise of good quality tapered roller bearings, it can be used. 1.Electric heating plate heating method Put the bearing on the electric heating plate with a temperature of 100 鈩?for a few minutes. This method is the most simple. If it is turned several times, the bearing can be heated evenly, and the efficiency is also high. This method can be used. 2. Electric furnace heating method Put the bearing in a closed automatic temperature-controlled electric furnace for heating, the heating is uniform, the temperature control is accurate, the heating is fast, and it is suitable for heating many bearings in a batch. 3. Induction heating method The use of induction heaters can quickly, reliably and cleanly heat the spherical roller bearing to the required temperature, which is especially suitable for occasions where the inner ring is tightly fitted, because only the inner ring is heated, and the outer ring is heated. The ring is less heated, which makes it easier to install on the shaft and into the seat hole. 4. The light bulb heating method uses a 50W light bulb to heat the spherical roller bearing, which can ensure that the heating temperature is about 100 掳 C. The smaller bearing can be placed directly on the bulb, and the larger bearing can be placed in the cone of the bulb. The cover can prevent the heat loss of the bulb, and make the heating uniform. The conical cover can be adjusted up and down, and can be adapted to heat bearings of different sizes within a certain range. If far-infrared light bulbs are used, pay attention to the direction of the light bulbs, so as to avoid infrared rays being harmful to people. This kind of light bulb can be used for energy-saving light bulb heating method, which is suitable for a small number and is not often needed; where the bearing needs to be heated, the light bulb can also be used for lighting at ordinary times, and no other equipment is required. 5. Oil tank heating method This is a widely used traditional heating method. A metal mesh is installed at a distance of 50~70mm from the bottom of the oil tank, and the bearing is placed on the mesh. The large bearing should be lifted by hooks and should not be placed directly at the bottom of the tank to prevent contact with the tank. The bearing parts at the bottom are locally heated too high, or the dirt deposited at the bottom of the tank enters the bearing oil tank. The points to note in the heating method are as follows. Non-corrosive mineral oil with good thermal stability should be used, preferably transformer oil. Both oil and container should be used. The capacity of the oil tank to keep clean should be determined by the size and oil volume of the heated spherical roller bearing. If the container is too small, during continuous operation, the oil temperature will drop quickly once the bearing is put in, and the effect will not be good.China Spherical Roller Bearing website:http://www.bearingssuppliers.com/spherical-roller-bearing/

Egg Tray Forming Machine manufacturers

Egg Tray Forming Machine manufacturers About COTEC COTEC is a recognized manufacturer and exporter of pulp & paper-making machinery and related products in China. From Stock preparation to paper products, COTEC provides an optimal solution, design concept, and installation worldwide. As a result, we can be your best solution and partner in starting a paper mill. Whatever the size of your project, we'll take it on. We will be your best partner in building to adapt to your project's needs efficiently and on demand. Co-Founder Mr. Yubing Zhao Bachelor of Xi'an Jiaotong University 1975-1979 Senior Engineer One of the drafters of the QB 2551-2002 papermaking dryer standard Participate in design and construction projects: Hangzhou Zhongyi Paper Mill Zhejiang Samsung Paper Mill Hangzhou Chunsheng Paper Co., Ltd. Hangzhou Guofeng Paper Zhejiang Feima Paper Zhejiang Fuyang Kangyuan Paper Co., Ltd. Hangzhou Fuyang Nanhe Paper Co., Ltd. Fuyang Zhongnan Paper Zhejiang Jindong Paper Co., Ltd. Zhejiang Fuyang Nanhe Paper Co., Ltd. Zhejiang Wanxin Paper Co., Ltd. Fuyang Boda Paper Xinxiang Xinya Paper Co., Ltd. Xinxiang Hongda Paper Co., Ltd. Xi'an Hongguang Paper Co., Ltd. Xi'an Aohui Paper Co., Ltd. ...... COTEC Factory (Qinyang City, China) Why Choose Us? 1. BRINGS YOU A LOT We have products of varying quality and specifications to satisfy the market's expectations. We provide pulp and paper production equipment to global customers that can make toilet paper, Kraft paper, coated paper, boxboard paper, superstitious paper, cultural paper, cigarette paper, specialty paper, and so on. It is also CE compliant. 2. ONE-STOP SERVICE We usually contact customers via email and phone. We also go to different markets for a deeper understanding, meeting and discussing face-to-face. 3. OUR INTEGRITY We have kept our pledge of "not selling to our present customers' customers." We will never reveal our customer's firm name or purchasing scale without permission. We must protect the benefits and trade secrets of our current customers. 4. FULL SUPPORT Establishing mutual trust will not be simple, but we will do our best. We strive for long-term relationships and place a premium on quality and cooperation in relationship maintenance. We welcome your feedback and will ensure any suggestions are acted upon. We Help You Start From Sketch In Four Steps Step 1 Please submit your inquiry by telling us precisely what you require. Customer support will email you within 24 hours to assign an experienced engineer to assist you with your project. Step 2 In less than three business days, your dedicated engineer will provide you with a best available techniques reference document for the production of pulp, paper, and board. You can then reserve the technical docs to give comments. Step 3 Before production, double-check all product details with your engineer. Your engineer will organize, monitor, and ensure proper production. Step 4 We arrange for quality control, debugging, operator training, and sea/air transportation to any location in your country.Egg Tray Forming Machine manufacturers website:http://www.cotecmachine.com/

Cutting Disc factory

Cutting Disc factory Specification DiameterBoreCore ThicknessSegment DimensionSegment HightSegment NO. 30050/603.040*3.010/12/15/2021 35050/603.240*3.210/12/15/2024 40050/603.640*3.610/12/15/2028 45050/603.840*4.010/12/15/2032 50050/604.240*4.210/12/15/2036 60050/604.640*4.610/12/15/2042 70050/604.640*4.610/12/15/2050 75050/604.840*4.810/12/15/2054 80050/604.840*4.810/12/15/2057 Advantage: 1. HIGH QUALITY: Made with a very fine and uniform diamond grit, segmented diamond saw blades perform excellent cuts and nearly eliminate chipping on both the surface of the glass tile and its painted side. 2. WET USE: The diamond cutting disc for granite need to be used in wet. 3. Segments with even distribution diamond grits which precisely layout in three dimensional patterns can produce best performance with faster and consistent cutting and longer lifetime 4. Other special specifications and colors can be produced by clients' require 5. Segment slots help deliver a faster, cooler cut in multiple applications Description Item Name: Diamond cutting disc for granite Application: Cutting granite, marble, stone etc. Material: Diamond Powder and 65mn Delivery time: 15~20days MOQ: 20pcs Place of origin: China Technology: Brazing Segment Height: 10/12/15/20MM OEM: Accepted FAQ Q1. How is your quality? A1. We have a very seriously control system (ERP system). We guarantee the high performance of our products. Q2. Do you have different quality for different kind of material? A2. Yes, according hardness of material and material's feature, we have different typology respectively. Q3. What is the advantage of your products? We are a set design, manufacturing, sales as one of the professional stone machinery company. The main production line roadside stone machine, infrared edge cutting machine, automatic edge cutting machine, infrared block cutting machine, single-arm multi-edge cutting machine, large gantry cutting machine, bridge stone cutting machine, mining machine and various stone cutting machines. Q4. How can you guarantee quality? Always a pre-production sample before mass production. Always final Inspection before shipment. Q5. Can you make OEM? / Can you put customer brand? Yes, we can make the OEM for you if your quantity is large, customer logo, color, shape, package method should beprovided by the customer. Application: Angle Grinder, Table Saw, Marble Cutter, etc.Cutting Disc factory website:http://www.dafondiamondtools.com/cutting-disc/

1,3-Cyclohexanedione price

1,3-Cyclohexanedione price Company Profile Quzhou Hopemax Chemical Technology Co., Ltd is a comprehensive chemical company which gathering scientific research, manufacturing and marketing. Established in 1995, located in Quzhou, Zhejiang province, and engaged in R&D, manufacturing and sales of pharmaceutical intermediates, silicone products, flavours and fragrances . We have 3 factories are respectively in Changshan(, Zhejiang province(45000m2). Dexing Jiangxi province (50000 m2). Jinxi, Jiangxi Province(60000 m2) and a professional R&D center, its annual sales revenue exceeds 30million USD. 鈼?Our main products are 1,1,1,3,3,3-Hexamethyldisilazane; Hexamethyldisiloxane; Methyl Hydrogen Silicone Fluid; 1,1,3,3-Tetramethyldisiloxane;P-Phenylenediamine; Alpha-(2,4-Dichlorophenyl)- Imidazole-1-Ethanol;P-Bromofluorobenzene; Cyclohexaformyl Chloride; Fructone, etc. These products have been exported to worldwide. With rigorous attitude, sincere service and excellent products, we have established long and stable cooperative relationships with customers in Europe, America, Japan, Korea, India ,etc. And have gained great reputation from them. 鈼?Taking advantages of having some experienced senior engineers and advanced HPLC analyzers, our company has the capacity to produce the latest and most competitive products. So far, 8 products have taken the lead in the respects of scale, quality and technology, 3 products have been listed into national level new product item and are in the implementation. That will be the guarantee of the core competition advantage of the future development of our company. Products& Service Standard 鈼?The main products of the company currently include: hexamethyldisilazane, hexamethyldisiloxane, high-hydrogen silicone oil, hydrogen-containing double head, p-phenylenediamine, imidazole ethanol, p-bromofluorobenzene, cyclohexyl chloride, apple ester, etc. 鈼?The company has its own research and development department, equipped with advanced organic synthesis and analysis separation testing equipment, established a scientific quality management system. The research and development team is composed of talents in the field of medicine and chemistry. The company's technical personnel conduct research and comparison on each synthesis route, develop superior synthesis methods and separation methods, shorten the research and development time and reduce the purchasing cost of customers. 鈼?The company is now involved in biological, chemical drug related varieties of more than 400, with thousands of drug impurity reference products and customized finished products, spot inventory is sufficient, quality control. 鈼?The company always adheres to the entrepreneurial concept of "perseverance, hard work, pioneering and innovative", provides professional and efficient services for domestic and foreign drug research and development enterprises, and contributes our meager efforts to drug research and development. Welcome industry colleagues to consult and negotiate, we are willing to work with you to create a better tomorrow. Hopemax Factory Established in 1995, located in Quzhou, Zhejiang province, and engaged in R&D, manufacturing and sales of pharmaceutical intermediates, silicone products , flavours and fragrances. Factory facility Factory facility Factory facility Factory facility Laboratory Warehouse Our Certificate With the purpose of strengthening quality management, detailed standardization management and SOP have been made. Meanwhile, every employee at Hopemax has passed the training of all kinds of operations. Stringent process control and normative quality management assure the possibility of top-notch quality and service that in line with both home and abroad standard. Main Market These products have been exported to worldwide. With rigorous attitude, sincere service and excellent products, we have established long and stable cooperative relationships with customers in Europe, America, Japan, Korea, India, etc and have gained great reputation from them.1,3-Cyclohexanedione price website:http://www.hopemaxchem.com/

Customized Wired Earbuds 3.5mm

Customized Wired Earbuds 3.5mm COMPANY PROFILE LS TECHNOLOGIES LIMITED was found in 2006, it has grown and developed step by step for more than 15 years.聽 We have two industrial areas, for speaker range our production base is in Dongguan City Dalang Downtown, our headphone and earphone ranges is in Shantou City, Chaoyang Area, we have our own designer team, mould opening base and up to 800 Staffs in total. We are special in products development and sales from Bluetooth speakers, wired headphone and earphone, bluetooth/ TWS headphone and earphones etc, involved in OEM and ODM projects. We have capacity of ID design, tooling processing, molding injection, finished product assembly , packaging design, warehouse storage and so on. Providing our customers with one-stop service from sources design to the selling end.聽 Both of our production bases have passed BSCI, ISO and Disney factory audited, we have been cooperating with many big brands and company such as Pepsi, Budwiser, Zara Home, Movistar, Pony Malta, Disney, Lenovo, Walmart, Carrefour and so on. CEO'S MESSAGE 1. Business Concept: Integrity and compliance, common development聽 Be an honest and trustworthy business enterprises, developing and growing together with our customers and suppliers.聽 2. Core Competitiveness: Quality, Team, Normative and Professional聽 Quality First, Mature Teamwork, Standardize Production, Specialized Research and Development(R&D), Professional Manufacturing聽 3. Enterprise Spirit: Unity , Happiness, Responsibility, Enterprising聽 Make sure everyone works as one team, feel happy to work with great responsibility and a positive attitude towards the job. Sincere unity and cooperate happily. 4. Growth Positioning: Long-term. Stable, Innovative, Technology聽 Continue to innovate and focus on technological development, so as to be a century-old enterprise. ORGANIZATIONAL STRUCTURECustomized Wired Earbuds 3.5mm website:http://www.longshengltd.com/

400x400mm A15 Firber Pit Lids manufacturers

400x400mm A15 Firber Pit Lids manufacturers M&C Facility Co.,Ltd is the leader of one-stop solution for gas station system, with more than 20 years of professional production experiences. M & C is committed to the design, development, production and sales of High-Strength SMC composite manhole covers and related products, oil transmission and leakage prevention system products of gas stations, dispensing and tanker fittings. Since its inception, M&C has taken SMC (FRP)Heavy Duty composite manhole covers, oil leakage prevention system of gas station, Nozzles of gas station and other accessories as its core business development direction, providing efficient, professional and high-quality one-stop supply services for domestic CNPC銆丼inopec銆丼hell and foreign oil stations, municipal and electric power units. M & C continuously improves and updates the production equipments, independently researches and develops the composite material formulas with special functions, and takes international standards such as EN124, EN1433 and AS3996 as the product design锛宒evelopment锛宲roduction and inspection standards of our enterprise. Professional development experiences and abilities help the company to constantly tailor various products with different functions for domestic & abroad customers, which are widely used in many fields such as petroleum, petrochemical, electric power, communication, municipal construction, and exported to overseas markets such as Europe, the United States, Australia, South Africa and the Middle East. M & C takes "Strict Quality Control", "Professional Technical Ability" and "High-Quality and "Efficient Service" as the Guidelines, and by virtue of our deep understanding of the general equipment of gas stations, we constantly combines experience, technology and innovative ideas to provide customers with "Simple, Convenient and Safe" solutions.400x400mm A15 Firber Pit Lids manufacturers website:http://www.pscomposite.com/

wholesale Drive Chain and Sprocket

wholesale Drive Chain and Sprocket OUR HISTORY Before 2011 Established a lumber mill, known as the No. 1 lumber mill in Shaoxing-Shengzhou Mingmu Lumber Factory. 2011 Shengzhou Tomorrow Machinery was established. 2018 Shengzhou Tomorrow Machinery expanded. 2019 Shengzhou Tomorrow Machinery implements 5S management. 2020 Hangzhou YangQi Imp&Exp co.,Ltd was established. OUR FACTORY Hangzhou Yangqi Import and Export Co., Ltd. specializes in the production of various power transmissions, such as: Sprockets, roller chains, gears, couplings, racks, hubs, pulleys, taper sleeves, bearing housings, etc. In addition, we can produce customized power transmission products according to customers' drawings. Our products have been exported to customers all over the world and have won a good reputation for our excellent product quality and after-sales service. Warmly welcome domestic and foreign customers to call to discuss business, exchange information and cooperate. We have more than 120 workers and own CNC lathes and CNC machining centers. We are one of the best manufacturers and suppliers in China, choose quality manufacturers, suppliers, exporters at YQ.com. QUALITY CONTROL Strict quality control can provide customers with high-end products. WHY CHOOSE US Not Just a Supplier, an Industry Consultant. Professional Sales And Engineers: YQ will be eager to help every customer, skilled in sales and technical cooperation, and help customers solve any questions. Cost Price: YQ will provide customers with the best price, help customers choose the quality and price suitable for their market, bring maximum benefits to customers, and achieve win-win cooperation. Good Quality: YQ has 6 quality inspectors, and each department will select some samples for testing to control the quality. After the quality is qualified, the shipment will be arranged to the customer. Stable Delivery Time: YQ will give customers the most stable delivery time and deliver on time. If the customer has special circumstances, it will help the customer to deliver the goods in advance to support the customer's work. OUR CERTIFICATEwholesale Drive Chain and Sprocket website:http://www.rollerchainsprockets.com/

Stainless Steel Products made in China

Stainless Steel Products made in China Product Introduction The sets of grey-blue color tempered glass top with golden stainless steel legs are very popular in the contemporary era, representing the preferences of the young generation. The unique fashion style of small tubes combined into a shelf makes the overall style more modern and simple. The star grey-blue glass desktop looks a little retro, which is easy to match with different living room styles Product Parameter (specification) Size锛?/strong>(WxLxHxSH)锛?/strong>1230x630x450/ 1230x430x780/ 580x580x550MM Material锛?/strong>GLASS;METAL TUBE Package锛?/strong>1pcs/1ctn Load Ability锛?/strong>467/728/1080pcs Use for锛?/strong>Dining room, Living room Our Company Production Process Product Qualification FAQ 1.What is your lead time? It depends on the order quantity and models you place the order. Usually, we can ship within 30-45 days after receiving the deposit. if hot models we do delivery fast like 15 days. 2. What are your advantages compared with other factories锛?/strong> Design, quality, and services. We are experienced in home furniture export that we have been doing over 8 years, we do all home furnishing furniture like tables chairs and coffee tables . we have a professional team like the design team who develop over 60 new design every year, QC team check orders before loading to make sure all good鈥?/p>Stainless Steel Products made in China website:http://www.soonly-furniture.com/stainless-steel-products/

Semi Trailer Axle

Semi Trailer Axle There are two kinds of axles, one-piece axle tube and welded tube, solid axle head, long service life.High-quality non-asbestos environmental protection friction plate, good performance, easy to replace. Bearings are high-frequency hardened, with large bearing capacity, high speed and safe use. The tire bolts are made of alloy steel with high strength. Equipped with two positioning sleeves. ModelLoading CapacityTrack VM12FA1347D12 Tons1840mm VM13FA1348D13 Tons1840mm VM14FA1348D14 Tons1840mm VM16FA1348D16 Tons1850mm VM18FA1349D18 Tons1840mm Special heat treatment, low alloy steel axle beam, good comprehensive performance, strong bearing capacity, low dead weight. High quality alloy solid spindle provides superior fatigue resistance through integral heat treatment. Camshaft adopts special sealing processing to ensure that grease will not enter the brake drum, which is more safe. Packaging & delivery Semi flatbed trailer parts 1. Bulk Stretch film Packing and Container Transportation 2. Plywood Case Packing and Container Transportation FAQ 1. How can we guarantee quality? Always a pre-production sample before mass production; Always final Inspection before shipment; 2. Why should you buy from us not from other suppliers? Professional manufacturer of trailer axles, suspensions of innovative enterprises. For the innovation of the products research and development, quality assurance. Based on quality survival, reputation and price for competitive business philosophy. 3. What information should I let you know if I want to get a quotation? Please let us know the your purpose,road condition,cargo type,tons of your cargo,dimensions of trailer,quantity etc. The more info. you provide, the more accurate model and price you will get. 4. How can I get the price of your vehicle? You can connect with us through any of the following contact information. Our personalized service person will respond you within 24 hours.Semi Trailer Axle website:http://www.vmsemitrailer.com/trailer-parts/semi-trailer-axle/

Polyester Oxford Dog House factory

Polyester Oxford Dog House factory Zhejiang Welling Houseware Co., Ltd Zhejiang Welling Houseware Co., Ltd is one of the top manufacturers of high quality pet beds, pet toys, cat towers, pet beanbags, yoga balls, pillows and so on. We are located in the center of the textile industry in Tongxiang, Zhejiang, China. It's between Shanghai and Hangzhou, it's about 15 minutes from Hangzhou to Tongxiang by high-speed train, and it is about 30 minutes from Shanghai to Tongxiang. So the transportation is very convenient. Our team have over 13 years of production experience with more than 150 employees, and has been dominating the industry since 2009. We have the professional R & D team, production team and QC team. Our professional R & D team, whose designs are famous in Europe and United States. Our monthly capacity is about 200k pcs beanbag covers. In addition, we have done BSCI, COC&GMP for Costco and other factory inspection. Just because of our good product quality, competitive price, better customer service, great ability of creating new product design, and development. We have been established a good reputation among our customers, and we have already built up a long term business relationship and partnership with buyers all over the world. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. 1 Our Motto "To help our clients to win the market, and to build a win long term partnership" 2 Company Target Market Europe and the United States, Australia, Southeast Asia, etc. 3 Advantages of This Industry The lazy sofa shape is changeable, lightweight, sitting or lying on it makes people relax physically and mentally, and is favored by the majority of young people. Differences The traditional sofa is very heavy, it is not convenient to move, and then the corners are clear, and the children are easy to touch, but our lazy sofa is light, and a child can move and can be placed in any corner of the house. Can't touch the injury a. We have 13 years of experience in professional pet supplies and pet lazy sofas b. We have professional R & D personnel and have developed a lot of explosive models for foreign customers c. We have a professional QC team, quality is life, strictly control the quality d. We have 7*24 hours customer service service e. Our factory is located in the center of the Yangtze River Delta. There is a mature textile market around the surrounding area. f. We pass the COSTCO COC and GMP certification, etc. ZHEJIANG WELLING HOUSEWARE CO.,LTD is a large scale textile company. Our headquarters and factory are located on heart of textile industry in China. Our location allows for convenient shipping vis Shanghai or Ningbo. We have our own experienced professional design team who follows market trends and have built up a very good quality control team as well. Strong clients relationship is our priority. Our goal is to maintain quality products at competitive prices. Today, with the rapid development of science and technology, we are produced everywhere during process production. Therefore, handmade is particularly special. We have handmade and machine production during the sofa production process. For example, in some parts of the product, our factory workers need to sew manually. The machine can improve the production efficiency of the factory and make the product more refined. Weiling strives to provide customers with the best pet products!Polyester Oxford Dog House factory website:http://www.wlpetribe.com/

Server Rack Lifepo4 Battery

Server Rack Lifepo4 Battery Dongjin Group is a company dedicated to the production, R&D and sales of lead-acid batteries, Lithium battery packs and lithium battery cells. Headquarters located in Shenzhen. Dongjin Group has established lithium battery and lead-acid battery factories in Dongguan, Guangdong Province and Xingan County, Jiangxi Province respectively. We have invested and built factories in Bangladesh, Pakistan, India, the Philippines, Turkey, Brazil and other oversea countries, with more than 4,000 employees and a R&D team of more than 325 people. Equipped with advanced manufacturing line, and strictly following the ISO9001 quality management system, Through 30 years of experience in the battery industry, Dongjin Group is committed to providing domestic and foreign customers with the highest quality products, including: lithium battery packs, lithium battery cells, lead-acid batteries, etc. Products are widely used in solar energy storage, UPS, telecommunications, electric vehicles, outdoor mobile power and other applications, and are deeply loved by customers. Jiangxi Factory Jiangxi Factory Dongguan Factory India Factory Philippines Factory Bangladesh Factory Brazil Factory Pakistan Factory Turkey Factory The internal environment of the factory Company Mission We are committed to creating more values for our customers, partners and employees as well as the whole society with Dongjin Principles: Stable quality Environment protection Reasonable price Timely delivery Fast response service Corporate Vision To be the world-class new energy battery manufacturer for UPS, Solar Energy Storage, and Motive power industry.Server Rack Lifepo4 Battery website:http://www.dongjin-battery.com/

JET Micro

JET Micro In 2017, in order to provide optical preform and optical fiber supporting services to FCJ OPTO TECH, FCJ Group invested in Hangzhou Yongte Information Technology Co., Ltd, which specializes in the development and production of integrated rods and fibers. The company adopts advanced VAD+OVD rod making technology and mainly manufactures optical fiber preform and optical fiber products that meet G.652, G.654 and G.657 series and other special applications. In 2018, in order to further enrich the optical communication industry chain and provide advanced optical rod production and manufacturing equipment and corresponding technical support for the Group's optical communication section, Hangzhou Yongtong Smart Technology Co., Ltd, a subsidiary of FCJ Group, was established. The company has mastered the development dynamics and technical characteristics of high purity synthetic quartz technology in domestic and abroad, and is familiar with high purity synthetic quartz equipment, process, production management and system maintenance, and has launched a full range of products from deposition to sintering of high purity synthetic quartz. As a professional manufacturer of communication products, FCJ OPTO TECH. has achieved full coverage of the industry chain of rods, fibers, cables and optical devices, with an annual production capacity of 600 tons of optical fiber preform, 30 million core KM of optical fiber, 20 million core KM of fiber optic cables, 1 million KM FTTH Drop cables, and 10 million (sets) of various types of passive components. FCJ OPTO TECH is the core subsidiary of the "information and communication" industry of FCJ Group, one of the top 500 private enterprises in China. The company was founded in 1992 and is a the national high-tech enterprises that specializes in R&D, production and sales of all kinds of optical fiber, Fiber optic cable, passive optic component and accessories. The first HYYV local telephone cable in Hangzhou (In 1986) and the first communication optical cable in Zhejiang province (In 1988) were born in our company. The company is called the "Whampoa Military School" of optical communication base by industry insiders. FCJ is located in Fuyang District, Hangzhou City, Zhejiang Province, with a registered capital of 300 million RMB. Headquarter covers an area of nearly 20 hectare and has construction area of more than 100,000 square meters. The company has nearly 1,000 employees with a strong team of professional and technical personnel that engineer has worked in the communication industry for 20+ years, Sales manager 15+ years. FCJ is also one of the standard-setting members of China Communication Industry. FCJ owns two listed companies, Hangzhou Cable Co., Ltd. (stock code 603678) and Zhejiang FCJ Environmental Thermoelectric Co., Ltd. (stock code 002479). FCJ's products are widely used in China Mobile, China Telecom, China Unicom, National radio and television, SGCC, National defense engineering and railway, subway, highway, airport, oil field and other key projects. Meanwhile our products have been applied in Shanghai, Zhejiang, Jiangsu, Anhui, other Yangtze River Delta region and the Pearl River Delta region market of China Telecom, China Unicom, China Mobile. We have participated in the supply of optical cables for domestic key high-speed railway lines and urban subway lines, etc., and exported to Europe, America, Africa and Asia and other countries and regions. Our products have been well received by customers at home and abroad. The company has been awarded as one of the top 100 electronic information enterprises in China, one of the top 10 innovative enterprises in China's information industry, and one of the top 10 optical communication enterprises with the most comprehensive competitiveness. As a designated supplier for national Telecom operators, our products are widely used in China Mobile, China Telecom, China Unicom, National Radio and Television, National Power, Malaysia Telecom, Nepal Telecom, Egypt Telecom, Sri Lanka Telecom, Telef贸nica etc., and key projects such as railroads, subways, highways, airports and oil fields. In Shanghai, Zhejiang, Jiangsu, Anhui and other Yangtze River Delta region of telecommunications, Unicom, mobile and the Pearl River Delta region of Guangdong Province mobile, Unicom market are applied; participate in the domestic key high-speed rail line, the city subway line of fiber optic cable supply, etc., and exported to Europe, America, Africa and Asia and other countries and regions, the products have been well received by domestic and foreign users. The company has been awarded as one of the top 100 enterprises in China's electronic information, one of the top 10 innovative enterprises in China's information industry, and one of the top 10 enterprises with the most comprehensive competitiveness in China's optical communication. Wherever you are, We FCJ always can be your strong supporter in the field of optical communication. we'd like to hear from you any time.JET Micro website:http://www.fcjcable.com/

Carbon Fiber Fabrics factory

Carbon Fiber Fabrics factory 聽 The Carbon Fiber Forged Prepreg provided by High Gain, which adopts imported carbon fiber tow and is processed into various specifications of prepreg by special process. The prepreg provided is the first choice material in the fields of aerospace, automobile industry, sports equipment, medical equipment, fishing rod, etc. 聽 Specification of prepreg 聽聽 2. Low temperature curing epoxy Minimum curing temperature 80 鈩?= 12 hours 85 鈩?= 10 hours 100 鈩?= 8 hours The utility model is convenient for the use of large-scale moulds, and can be used for wind power blades, yachts, etc. 聽 3. Fast curing prepreg resin TG 130 鈩?/p> Curing temperature 130 鈩?= 20 minutes 150 鈩?= 7-10 minutes 160 鈩?= 5 minutes It is suitable for products with high mold turnover frequency, such as automobile industry. 聽 4. High Temperature Resistance Epoxy Suitable for high temperature industrial products and aerospace field. tg=230 鈩?/p> 2h@170 鈩?/p> 3h@180 鈩?/p> 聽 5. High Temperature Resistance Epoxy tg=230 鈩?/p> 2h@170 鈩?/p> 3h@180 鈩?/p> 聽 6. Carbon Fiber Forged Prepreg Tape / Towpreg The Carbon Fiber Forged Prepreg tape is using spread tow to ensure that the strength and physical properties of each prepreg tape are consistent with that of single tow. 聽 HG Carbon Fber Towpreg has a proprietary thermosetting resin system and can be stored at room temperature. It can be used with many types of filament winding machines and new processes like automatic tape placement directly. It has good strength, good impact resistance and is suitable for pressure vessel filament winding process. Epoxy Resin Content: Resin content and fiber can be adjusted according to product and manufacturing processes, generally it would be 32% No release film is needed and the resin content is rather accurate during the production. The working environment is largely improved and the mechanical properties of the final products are upgraded while the number of defects is reduced. The weight can be controlled effectively. Resin System: HG-518 (Medium Temperature Curing) Resin Carbon Fiber: Toray T700SC-50C or equivalent 聽 7. SMC prepreg We provide carbon fiber short fiber reinforced plastic sheet prepreg forming materials (SMC). It has superior flame retardancy, corrosion resistance, light weight, easy and flexible engineering design and other characteristics. Its mechanical properties can be comparable to those of some metal materials. Its products have the advantages of good rigidity, deformation resistance, lightweight, and wide temperature range. 聽 Product features 聽鈥?Low VOC: no styrene monomer and other organic solvents, VOC emissions can meet international standards 鈥?The epoxy resin and carbon fiber in the product have the best interface bonding performance, optimizing the vinyl resin of the same type 鈥?3-5 min rapid prototyping at 150-160 掳 C Low density, high strength and good toughness 鈥?It is suitable for the production and manufacture of various complicated and irregular structural parts and sub structural parts 聽 Recommended molding process 聽 1. Cutting control a. Automatic cutting equipment is recommended. b. When SMC materials are cut, the weight of the cut part is 102-105% of the component weight. The SMC sheet coverage in the mold is 60-80%,. c. The mold coverage area can be reduced to 30% according to the absolute flow length, geometric complexity and the actual conditions of the grinding tool temperature. 2. Clean the mold. 3. Spray external release agent (SMC sheet contains internal release agent, but it is still recommended to spray external release machine to prevent sticking). 4. Adjust the mold temperature to 130-160 掳 C. 150 掳 C is an ideal molding temperature. Note: At lower temperature, higher surface quality can be obtained by prolonging the curing time. 5. Adjust the die pressure to 60-150 kg/cm2 (kg/cm2=0.1 MPa). 80-100 kg/cm2 is an ideal pressure. 6. Put the SMC material into the mold and close the mold according to the following operation. a. Before reaching the height of the mold cavity, the press should press quickly. b. When approaching the height of the die cavity, the pressing speed of the press shall ensure that the die is closed slowly. 1 mm/s is a recommended speed. c. It is recommended to use vacuum assisted molding before the material gel, or within the initial 60 second molding time. The vacuum degree shall be at least 50 mbar. 7. Determine the curing time according to the product size and mold temperature (generally 3-10 minutes). 8. Take the product out of the mold and start the next cycle.Carbon Fiber Fabrics factory website:http://www.hgcomposites.com/carbon-fiber-fabrics/

wholesale Kid's Pullover Vest Sweater

wholesale Kid's Pullover Vest Sweater Hangzhou Kuodian Garment Co.,Ltd聽 was found in 2011, which located at Hangzhou, China, with only two hours鈥?drive from shanghai. Our company are specialized in producing high-class cashmere, merino wool and other mixed high-quality knitwear. We have established professional merchandiser teams, skillful technician teams, independent design research & development teams. Over 3,000 popular styles are developed and produced every year.聽 For the past years, we established solid relationship with our clients, such as Qvc, Monsoon, Caroll, Gerard Darel, Ikks, Riu Pairs, Tjmax, Lane Byrant and the annual turnover exceed 10 million dolla.wholesale Kid's Pullover Vest Sweater website:http://www.kuodiansweater.com/

wholesale Electric Polisher

wholesale Electric Polisher 鈥?Company Profile Hunan Yuanju Power Tools Manufacturing Co., Ltd is a leading manufacturer of lithium cordless power tools, we manufacture DC electric brushless and cordless wrench, electric drilling machine, electric rotary hammer, chain saw, circular saw, tiles paving machine, saber saw, angle grinder, reciprocating saw, electric shear, lithium screwdriver, air blower/ dryer, all are lithium powered with innovative design, high quality, fast delivery, competitive price and superior after-sales service. Furthermore, our product line is constantly expanding to cover all the categories of power tools. We also have a strong R&D team for researching and developing brushless motors for all power tools, we have 12 complete production lines for power tools assembling and motor production. Our daily production capability is over than 5,000 pcs of power tools. After several years efforts, we've built good & stable cooperative relationship with customers from Europe, North America, Middle East, South Asia and other markets 鈥?nbsp;Company Certificate National Patent, CE/TUV/SGS certificates 鈥?nbsp;Competitive Advantage Innovative design, R&D team, high quality, fast delivery, competitive price and superior after-sale service, OEM/ ODM service, 7 days refunding policy, customer factory visit 鈥?nbsp;R&D Capability 12 people team, 2 PhD, 4 senior engineers, 6 technicians for different brushless DC motors for all kinds of power tools and any OEM/ ODM plan, we have all equipment for brushless DC motor R&D, testing, mass production. 鈥?nbsp;Corporate Vision We are a "Lithium-Ion Sharing Platform" we devote ourselves to New Energy Project, help the world to be more clean and more eviroment-protection! 鈥?nbsp;Company Values We take our customers as our friends, we value what our friends value, share same value view with our friends!wholesale Electric Polisher website:http://www.lithiumpowertool.com/

China Crystal Chandelier

China Crystal Chandelier This Crystal Island Chandelier is a traditional design updated for the modern aesthetic,a classic candle-style silhouette gets a contemporary refresh with this ten-light chandelier. Product Detail A brushed nickel finish offers gleaming appeal,while hollow metal frame draw the eye and lend classic flair. Ten bulbs-inspired lights ensure ample illumination. Application This Crystal Island Chandelier combines traditional style with a sleek, modern feel that stands out in your dining room or entryway. Packaging 鈼?Risen has the professional designer team to do the packaging design 鈼?Use recyclable materials for package 鈼?Professional testing equipment to test the package Production & Shipping 鈼?FOB Yantian 鈼?Sample lead time: 7-10 days 鈼?Delivery time: 45-60 days after order details and production confirmed. Why Risen 鈼?Strong professional technical team ensure to produce the top quality products. 鈼?Special cost control system ensure to provide the most favorable price. FAQ Q: Are you trading company or manufacturer? A: We are professional manufacturer specialized in lighting products. Q: Can you do OEM and ODM? A: Yes, OEM and ODM are both acceptable. The material, color, style can customize, the basic quantity we will advise after we discuss. Q: Can we use our own logo? A: Yes, we can print your private logo according to your request. For more about this Crystal Island Chandelier,please contact us! Thank you!China Crystal Chandelier website:http://www.risenlighting.com/chandeliers/crystal-chandelier/

Wholesale Tempered C Channel Glass

Wholesale Tempered C Channel Glass Company Profile Development of the Company The organization chart Company Profile Yongyu Glass is a professional U glass and traditional architectural glass supplier from China. Yongyu Glass was founded by Gavin Pan, who has worked in the architectural glass industry since 2006 and has more than fifteen years' North American and E.U. market export experience. The company was established with a wish to integrate the advantage resources of building the region's glass industry and provide personalized solutions to the needs of our customers. We find personalized solutions for the customers' demands and help customers save time and money. 馃挕 WHAT WE DEAL WITH: 鈽?High-performance low iron U glass systems (U glass, also called U channel glass/U profile glass/C-glass) 鈽?Ice rink glass system (1/2", 5/8" tempered glass, laminated glass) 鈽?Jumbo safety glass (Jumbo tempered glass, Jumbo tempered laminated glass, Jumbo IGU) 鈽?Curved safety glass (Curved tempered glass, Curved tempered laminated glass, Jumbo curved safety glass max 12.5 meters tall) 鈽?SGP laminated glass 馃挕 HOW CAN WE HELP: 鈽?Engaged in the architectural glass industry and served customers both home and abroad for more than 15 years. 鈽?Help glass facades companies and architectural designers find personalized solutions and help them save time and money. 鈽?Manufacture and provide high-quality products and thoughtful after-sales service We are SGCC approved supplier; our products are meet the primary standards of building glass products. Convenient communication, the whole production process can be traced back, 7*24h after-sale service is our promise. 馃挕 WHAT WE DO: Consolidate superior resources to provide personalized solutions for you. 馃挕 WHAT WE CARE ABOUT: Quality conquers the world, service achievements in the future 馃挕 OUR MISSION: Work together to achieve a win-win, create a transparent vision! Development of the Company LABER is based on U-profile glass, concentrates on safety U-profile glass, creates a new U-profile glass photovoltaic power generation system, and gradually develops into a comprehensive company with new technology, new materials, and new applications as the core. We adhere to the people-oriented business philosophy; our ongoing pursuits are excellent product quality and perfect technical services. LABER has an experienced sales team and professional team of engineers, from design and consulting to installation and after-sales, to provide you with a full range of personalized solutions. Over the years, with innovative ideas, first-class products, and a perfect service system, LABER has been recognized by owners, design institutions, and engineering companies. LABER cooperating with JANGHO Group, YASGA Zhejiang, CSCEC, BUCG, and other curtain wall companies, completed several influential domestic projects: Peking University New Media Industrial Park, Vanke Qingdao, Vanke Fuzhou, Vanke Xuzhou, CITIC Kangheng, Hunan Provincial Architectural Design Research Institute, Li Zijian Art Museum, Wuhan Garden Expo Park, Poly Real Estate, Country Garden Real Estate, etc. In 2009 LABER Share (China) Limited and Qilu University of Technology (formerly Shandong Institute of Light Industry) jointly conducted technical cooperation in 2009 to develop a U-profile glass production line. It first established a test line in Dezhou City, Shandong Province. After more than three years of hard work, a series of technological innovations solved the problem of glass forming technology and finally completed the development of the entire project. In January 2012 The project was technically transformed and expanded production capacity in Chongde Second Avenue, Dezhou Economic, and Technology Development Zone. Using Siemens technology and the Danfoss control system, the U-profile glass production line independently developed was established in China. The same year, LABER completed the U-profile acid etched glass process design and the production line installation. It is the first acid etched U-profile glass product line in China. In 2014 R&D of tempered U-profile glass was carried out. The safety of U-profile glass has always been a concern of our customers. To solve this problem, LABER carried out experiments on central domestic tempering furnaces to obtain relevant data and customized a 9-meter eddy current tempering furnace according to actual conditions, completely solving the critical heating and cooling problems. The horizontal deformation and side deformation are under 0.05 鈥? The manufacturing yield is 96%. And the batch production of tempered U-profile glass up to 8 meters is realized. In 2015 The first low Iron U-profile glass production line was established in Zhengtai Science and Technology Pioneer Park in Chiping, Shandong. The LABER U-profile glass has a light transmittance of over 90% through various tests. LABER is one of the leading manufacturers specializing in producing low iron U-profile glass domestically. According to market demand, the company has developed a painted U-profile glass, which makes the U-profile glass colorful. In the same year, LABER developed and produced wired U-profile glass to meet the needs of foreign markets. In 2017 LABER and U Solar New Energy Co., Ltd. researched and developed the U-profile glass photovoltaic power generation system, making it one of the standard components of green building. LABER U-profile glass photovoltaic power generation system has been used in the Poverty Alleviation Project of Photovoltaic Power Generation in Guizhou and LAFAYETTE148 NEW YORK Shantou company. LABER U-profile glass photovoltaic power generation system makes buildings more energy saving. In 2018 LABER started researching and developing laminated U-profile glass for high-rise buildings, which use EVA interlayer to make the quality of U-profile glass much safer and more stabler. In 2019 LABER cooperated with Qinhuangdao Yongyu Glass Products Co., Ltd. to develop the international market. Through joint efforts of both sides, the LABER U-profile glass has been tested by Intertek Laboratories in the United States and TUV Laboratory in the Netherlands. LABER U-profile glass meets the requirements of the United States, Canada, and EU markets. LABER U-profile glass has passed the SGCC & CE certificates. In 2021 LABER conducted research, development, and production of photoelectric U-shaped glass. And in several projects, such as the Hunan Art center application. LABER launched solar photovoltaic glass, wall display, and wall power generation combined as one product, reducing building energy consumption and increasing building lighting. LABER is based on u-shaped building glass, focuses on safety u-shaped glass, creating new energy BIPV - u-shaped glass power generation system, gradually developed into new technology, new materials, and new applications as the core of the integrated company. The company adheres to a people-oriented business philosophy; our unremitting pursuit is excellent product quality and perfect technical service. The company has experienced sales and professional engineer teams, from design consulting to installation and after-sales, to provide you with a full range of personalized solutions. The organization chartWholesale Tempered C Channel Glass website:http://www.uglass.online/

Sport Backpack

Sport Backpack Our History USL Asia Limited锛圤r Quanzhou Fengze Youshilian Sports Goods Co. Ltd锛?is a professional bags manufacturer vendor with over 20 years experience for all kinds of bags and backpacks. We are specialized in outdoor backpacks,teamsports bags, laptop backpacks, dry bags, waterproof bags, fishing bags, yoga bags, diaper bags, running belt, cooler bags, lunch bags, school bags..etc. Our factory covers an area of 10000 square meter which included office building, dormitory and production building. We have 10 production line and 200 worker in total, and we have cutting, printing, stitching, quality inspection and packing in house. We are a full of confident and passion team. Our perspective is confidence,proactive, giving and dreaming. A person walks fast, a group of people walks far. There is no perfect individual, only perfect team. Our Mission: to be products solutions provider. Our Vision: Devote in helping customers, suppliers and employees succeeded. Certificates We are working with over fifty distinguished brands and retailers all over the world, for Brands, such Umbro, Ellesse, Nautica, Fila, Converse, Kappa, Lotto, Ecko, HoodRich, Stronger, LSDK, Castore, Nicce, Arsenal and Liverpool..etc and retailers, like JD Sport, Intersport, Go Sport, Zalando, ASOS, NEXT, Auchan, Sport Direct, ASDA, FootAsylum, TK Maxx, Lids .. Communication ISPO Munich is one of the largest outdoor fair all over the world which is held twice a year in Munich Germany, one is in Nov and another one is in July. This exhibition gathers outdoor brands from all over the world and it is grant event in sports industry. 2020 is the 10th time for USL Asia to attend. Paperworld in Frankfurt is one of the largest fair for stationeries all over the world, which is held each Jan. It is the 5th time for USL Asia to attend this fair in Jan of 2020. The main products at this fair have school bags, teenage bags, pencase, kids bags and all kinds of stationeries.Sport Backpack website:http://www.uslint.com/

Customized Alternative Plug Power Delivery Charging for Desktop IPad and Mobile Phones Chargers

Customized Alternative Plug Power Delivery Charging for Desktop IPad and Mobile Phones Chargers 鈥?Our Factory Shenzhen Jinyi Industrial Co., Ltd. is located in Shajing Town, Baoan District, Shenzhen City, The registered capital is RMB 3 millions, With over 100 employees. There are 10 senior engineers and 5 intermediate engineers among them. Jinyi is a high-tech enter prises which combination of industry and trade, import and export agents with strong R & D, the main products are small household appliances fan, electronic products, USB hubs, mobile phone holders, etc. The company focuses on technology, Pay attention to scientifific management, Strictly implement the total quality management system, IS9001 quality certifificate issued by the Swiss SGS, Shenzhen high-tech enterprises, Electronic products, fan products through international CCE銆丗CC銆丆B certifification, With over 10 patented product designs, With a leading technical force, Comprehensive marketing service concept, To meet the needs of customers at home and abroad, With the tireless efffforts of all staffff, Continuous development, transcendence, To make technology a home appliance, The goal of the fifirst brand of electronic products! Currently, With great skill, Our company has achieved scale and great development, Our products are exported to Japan, Korea, USA, Europe, Southeast Asia, Middle East, Africa, etc, With excellent results, affiffiffirmed and trusted by the majority 鈥宦?/strong>Our Product Docking Station Hubs, Data Cables,Alternative Plug Power Delivery Adapters, Laptop Stands, Foldable Air Fan 鈥宦?/strong>Product Application 3C household appliance, consumer electronics, Industrial application, office appliance, mobile phone and laptop peripheral device, Hi-tech appliance, gifts 鈥宦?/strong>Our Certificate ISO9001, CCE銆丗CC銆丆B 鈥宦?/strong>Production Equipment Punching Machine 55sets, Highlight Machine 15sets, SMT Mounter Machine 2sets, Injection Machine 7sets, Ultrasound Equipment 3sets, Oil Pressure Machine 3sets. 鈥宦?/strong>Production Market North America, South America, Europe, Asia, Oceania and Domestic Market. 鈥宦?/strong>Our Service We are manufacturer, provide one-stop service and professional customer service. OEM/ODM offered for our customers, can be customized customers various needs. Our products comes with 12 months warranty and life-time service supportCustomized Alternative Plug Power Delivery Charging for Desktop IPad and Mobile Phones Chargers website:http://www.yeahailhub.com/

Womens Suits

Womens Suits Our History Yingzi Trading Co., Ltd. was established on April 30, 1999. Legal representative Liu Guiying, the company's business scope includes: manufacturing and sales of clothing, knitwear, bedding, shoes and hats, toys, craft accessories; clothing design; venue leasing; catering management; property services; enterprise management consulting; self-operated import and export business; Software development, sales and related technical consultation; corporate image planning; advertisement production and release; network technology development, etc. Our Factory Dongyang Yingzi Trading Co., Ltd. was established in 1983 with a registered capital of 100 million yuan. It is mainly engaged in the design, production and sales of Yingzi brand men's clothing products. The company has always been adhering to the development ideas and business purposes of "expanding fashion with quality, winning customers with service, seeking survival with management, and seeking development with innovation", adhering to the marketing concept of "honest cooperation, win-win future", and established a standardized chain operation. The system has now opened more than 300 specialty stores in 25 provinces and cities across the country, with extensive influence and high brand recognition and reputation in the market. All the products of our company have passed the IS09001 quality system certification, and have been unanimously recognized and loved by consumers. At the same time, the company takes promoting national brands as its own responsibility, and aims to create "China's cutting-edge fashion professional wear and haute couture brand", adheres to the sustainable development strategy, is pragmatic and diligent, constantly develops and innovates, and strives to inherit the essence of the "Red Gang" suit craftsmanship , with the tenet of "fine workmanship, crisp lining, home ironing, fashionable styles, exquisite fabrics, complete specifications, and comfortable wearing". It provides high-end installation services for large-scale systems such as finance, highways, banks, aviation, and electric power, as well as enterprises and institutions. Our Product Men's Suits, Men's Shirts, Women's Career Suits, Men's Trousers, Women's Casual Pants, Women's Shirts, Men's Polo Shirts, Skirts, Men's Coats, Women's Wool Jackets, Men's T-Shirts, Dresses, Collar Accessories, Scarves/Scarves/Sunscreen men's miscellaneous bag Product Application General items of business scope: wholesale of clothing and apparel; Internet sales (except for commercial and residential products that require a license); retail of clothing and apparel; sales of clothing accessories; wholesale of shoes and hats; retail of shoes and hats; Cosmetics wholesale; cosmetics retail; needle textile sales; arts and crafts and etiquette supplies sales (except ivory and its products); sporting goods and equipment wholesale; sporting goods and equipment zero stationery wholesale; stationery retail; pet food and supplies wholesale toys Sales; sales of household appliances; sales of optical communication equipment (except for projects subject to approval according to law, business activities are carried out independently according to law with business licenses). Licensed items: Internet sales of food (sale of pre-packaged food); wholesale of medicines; sales of health food (items subject to approval according to law, business activities can only be carried out after approval by relevant departments, and the specific business items are subject to the approval results). Production Equipment TPU hot-melt film production machine, double-purpose rolling machine, cutting machine, electric knife, computer system for marking, interlining machine, buttonhole machine, sewing machine, overlock machine, lockstitch machine, four-thread overlock sewing machine , flat double-needle, double-needle machine, chain machine, three-needle five-thread interlock sewing machine, buttonhole machine, buttoning machine and other near-money equipment.Womens Suits website:http://www.y-zclothing.com/